全自動推桿式燒結裝備

設備用途及原理

   　自動推桿式燒結裝備主要用于粉末冶金鐵銅基制品燒結、磁性材料燒結、高合金及硬質合金制品燒結。 整套設備由爐體、料舟推送裝置及溫控系統三大部分組成。發熱元件分布在馬弗的上、下側，采用 爐體左右兩側貫通抽拉式安裝，安裝及維修十分方便。

Overview and Principles

Full-automation Pusher-type Sintering Equipment is primarily applied to the sintering of powered metallurgic Fe-Cu based products, magnetic materials, high-proportion alloy and cemented carbide products.

The entire equipment is consisted of three major components, furnace, material pushing device and temperature regulating system. Heating elements are distributed on and beneath the Muffle device, installed as draw-pull type of two lateral sides of the furnace connecting through with each other, convenient for installation and maintenance.

設備優勢及特點

   　 本設備結合多年制造設計經驗，并結合當前各領域高技術，應用保持行業高水平的整體解決方案系統，推出的廣受市場歡迎的新材料制備。

   　   主要有以下優勢和特點：

　　具備一體化爐體結構提升保溫性能且便于維護。前、后進出料端均設雙爐門構成氣體置換室，降低了氣氛的露點和消耗量,極大提高產品質量的穩定性和生產安全性。

   每段都配置由熱電偶、數顯 式智能PID調節器和可控硅組成的閉環控制系統，實現自動精確控溫(控溫精度±5℃)。

   推桿推力設定 監測，PLC+觸摸屏控制、操作一目了然，自動檢測程序保障設備安全運行。

Advantages and Features

   This equipment made by combining with rich experience of producing and designing, and also with the most advanced, presently, technologies among each fields, applies integrated solving system which maintains the leading-level in the field, and introduces the new material preparation which is commonly marketing-popular.

   It mainly has following advantages and features:

Own patent technologies . Uniformed furnace structure improves its temperature holding property and is convenient for maintenance. Both front and rear material passing ends are designed with bi-door furnace for constructing gas-replacing room, decreasing the gas exposed points and consuming, and greatly improving the steady of product quality and production security.

   Each stage is equipped with closed-loop control system consisted of thermocouple, digital-displaying type intelligent PID regulator, and pressure and power regulator, achieving in precisely auto-controlling temperature (temperature control precision ±5℃).

   Pusher’s pushing force is set with monitoring, PLC + touch screening control, simplified and clear operation, and auto-checking procedure guarantee device safely performing.

設備主要技術參數Principle Technical Parameters

以下是設備產品技術參數，部分數據會隨著產品創新改進，最新數據請聯系我們:

Product technical parameters of equipment are presented as below, and partial of these data will be updated as the product innovation, please contact us if any latest data:

以上為標準配置，可根據客戶要求進行調整。

It is standard configuration above, and can be adjusted according to the demand from customers.